Mapo Tofu is a home-style Chinese dish made with tofu, ground meat, and spicy sauces. The finished dish has a rich savory flavor, noticeable heat, and a mild numbing sensation from Sichuan peppercorns. This numbing sensation is a unique feeling that occurs when Sichuan peppercorns touch the tongue. It is different from the burning sensation caused by ordinary chili peppers.
When I make this dish, I pay particular attention to how I prepare the tofu and how long I cook the seasonings. For another chili-forward condiment, see our homemade Chinese chili oil recipe.
I use soft tofu, ground beef, Pixian doubanjiang, and a small amount of Chongqing hot pot base (optional). Pixian doubanjiang is a salty, spicy fermented sauce made from broad beans, chili peppers, and salt. It provides the main savory flavor and helps create the red chili oil. Chongqing hot pot base is a concentrated seasoning block used to prepare hot pot. It usually contains chili peppers, oil, and various spices that add aroma and depth to the dish. Pair it with a vegetable side such as our dry-fried green beans.
When cooking, I first blanch the tofu briefly in lightly salted water. Then I fry the ground beef and seasonings until fragrant. Next, I add water and let the tofu simmer in the sauce so it can absorb the flavors. Finally, I add cornstarch slurry in several batches to thicken the sauce and help it coat the tofu.
This recipe takes approximately 30 minutes and serves 2 to 3 people. The main flavors are savory, spicy, and numbing. It goes particularly well with rice.
In my experience, 3 details are especially important when making Mapo Tofu:
- Blanch the tofu in lightly salted water first.
- Fry the ground beef and seasonings thoroughly until fragrant.
- Control the simmering time and the amount of cornstarch slurry added at the end.
This recipe uses a small amount of Chongqing hot pot base to add layers of spice and aroma while preserving the main flavor of the Pixian doubanjiang. When making the dish for the first time, following the specified weights, volumes, and cooking times will help produce more consistent results than relying on guesswork alone.

Homemade Mapo Tofu
Ingredients
Equipment
Method
- Allow approximately 10 minutes for preparation. Cut 400 g of soft tofu into cubes approximately 2 cm on each side.
- Finely mince 8 g of fresh ginger and 10 g of garlic.
- Divide 15 g of scallions into 10 g of white parts and 5 g of green parts. Chop them separately.
- Cut 2 g of dried chilies into small pieces.
- In a small bowl, combine 6 g of cornstarch with 30 ml of cold water. Stir until there are no obvious lumps. The cornstarch will settle if the slurry stands, so stir it again before using.
- Pour 1,000 ml of water into a cooking pot and heat it to a boil at approximately 100°C.
- Add 5 g of salt and stir until it dissolves.
- Gently add the 400 g of tofu cubes. Maintain a gentle boil and cook for 2 minutes.
- Remove the tofu with a slotted spoon and allow the water to drain. Do not stir the tofu vigorously, as this can cause it to break apart.

- Place a wok or heavy-bottomed frying pan on the stove and preheat it over medium heat for approximately 1 minute.
- Add 15 ml of cooking oil and heat it to approximately 160°C. If you do not have a kitchen thermometer, look for slight ripples on the oil's surface. Do not allow the oil to smoke.
- Add 100 g of ground beef. Break it apart with a spatula and stir-fry continuously for 3–4 minutes.
- Cook until the beef has completely changed color, with no obvious pink raw meat remaining. Most of the moisture should have evaporated, and the meat should be lightly browned. Do not cook the beef until it becomes excessively dry.

- Reduce the heat to low.
- Add 8 g of minced ginger, 10 g of minced garlic, 10 g of chopped scallion whites, and 2 g of dried chilies. Stir-fry for approximately 30 seconds until fragrant.
- Add 15 g of Pixian doubanjiang and continue stir-frying over low heat for approximately 60 seconds, until the oil gradually turns red.
- Add 25 g of Chongqing hot pot base and continue stir-frying over low heat for approximately 60 seconds, until the base has completely melted and is evenly combined with the ground beef and doubanjiang.
- Pour 300 ml of water into the pan.
- Add 5 ml of light soy sauce and 2 g of white sugar. Stir gently to distribute the ground beef and seasonings evenly throughout the liquid.
- Bring the sauce to a boil, then gently add the blanched tofu.
- Reduce the heat and maintain the liquid at approximately 90–95°C, with gentle bubbling.
- Simmer for 4 minutes. During cooking, gently push the tofu with the back of a spatula so the sauce reaches different sides of the cubes. Do not stir vigorously.

- Stir the cornstarch slurry prepared in Step 1 again, then divide it into 2 portions.
- Add half of the slurry to the pan. Gently push the tofu to combine the slurry with the sauce.
- Continue cooking for approximately 30 seconds.
- Add the remaining slurry and gently push the tofu again.
- Continue cooking for 30–60 seconds, until the sauce thickens and lightly coats the tofu.
- If the sauce is still too thin, continue cooking for approximately 30 seconds to allow some water to evaporate. Stop cooking once the sauce coats the tofu evenly.
- Turn off the heat.
- Add 1 g of ground Sichuan peppercorns and sprinkle the remaining 5 g of chopped scallion greens over the dish.
- Gently push the tofu to distribute the peppercorns and scallions evenly.
- Transfer the Mapo Tofu to a serving dish and serve while hot. It can be served with hot steamed rice.
Notes
Important Tips for Cooking Mapo Tofu
How can I prevent the tofu from breaking apart?
First, choose tofu with a suitable texture. After blanching, remove it with a slotted spoon. During the final cooking stage, avoid stirring vigorously. Instead, gently push the tofu with the back of a spatula.
How can I prevent the sauce from tasting bitter?
After browning the ground beef, reduce the heat before adding the ginger, garlic, dried chilies, doubanjiang, and hot pot base. Fry the doubanjiang for approximately 60 seconds, then fry the hot pot base for another 60 seconds. Do not wait until the seasonings become dark and burnt before adding the water.
How can I control the saltiness?
Both Pixian doubanjiang and Chongqing hot pot base contain salt. Therefore, I do not add extra salt directly to the sauce during the final cooking stage. The saltiness of hot pot base varies by brand. When making this recipe for the first time, I recommend following the specified quantities. If you switch to a different brand, check the sodium content on the package.
How can I tell when the Mapo Tofu is ready?
The tofu should remain intact, and the ground beef should be thoroughly cooked. The sauce should have a reddish-brown color and be thick enough to coat the tofu. The finished dish should have no noticeable raw meat odor or burnt taste.


