Ingredients
Equipment
Method
Prepare the Ingredients
- Allow approximately 10 minutes for preparation. Cut 400 g of soft tofu into cubes approximately 2 cm on each side.
- Finely mince 8 g of fresh ginger and 10 g of garlic.
- Divide 15 g of scallions into 10 g of white parts and 5 g of green parts. Chop them separately.
- Cut 2 g of dried chilies into small pieces.
- In a small bowl, combine 6 g of cornstarch with 30 ml of cold water. Stir until there are no obvious lumps. The cornstarch will settle if the slurry stands, so stir it again before using.
Blanch the Tofu
- Pour 1,000 ml of water into a cooking pot and heat it to a boil at approximately 100°C.
- Add 5 g of salt and stir until it dissolves.
- Gently add the 400 g of tofu cubes. Maintain a gentle boil and cook for 2 minutes.
- Remove the tofu with a slotted spoon and allow the water to drain. Do not stir the tofu vigorously, as this can cause it to break apart.

Brown the Ground Beef
- Place a wok or heavy-bottomed frying pan on the stove and preheat it over medium heat for approximately 1 minute.
- Add 15 ml of cooking oil and heat it to approximately 160°C. If you do not have a kitchen thermometer, look for slight ripples on the oil's surface. Do not allow the oil to smoke.
- Add 100 g of ground beef. Break it apart with a spatula and stir-fry continuously for 3–4 minutes.
- Cook until the beef has completely changed color, with no obvious pink raw meat remaining. Most of the moisture should have evaporated, and the meat should be lightly browned. Do not cook the beef until it becomes excessively dry.

Fry the Seasonings
- Reduce the heat to low.
- Add 8 g of minced ginger, 10 g of minced garlic, 10 g of chopped scallion whites, and 2 g of dried chilies. Stir-fry for approximately 30 seconds until fragrant.
- Add 15 g of Pixian doubanjiang and continue stir-frying over low heat for approximately 60 seconds, until the oil gradually turns red.
- Add 25 g of Chongqing hot pot base and continue stir-frying over low heat for approximately 60 seconds, until the base has completely melted and is evenly combined with the ground beef and doubanjiang.
Add Water and Simmer the Tofu
- Pour 300 ml of water into the pan.
- Add 5 ml of light soy sauce and 2 g of white sugar. Stir gently to distribute the ground beef and seasonings evenly throughout the liquid.
- Bring the sauce to a boil, then gently add the blanched tofu.
- Reduce the heat and maintain the liquid at approximately 90–95°C, with gentle bubbling.
- Simmer for 4 minutes. During cooking, gently push the tofu with the back of a spatula so the sauce reaches different sides of the cubes. Do not stir vigorously.

Thicken the Sauce with Cornstarch Slurry
- Stir the cornstarch slurry prepared in Step 1 again, then divide it into 2 portions.
- Add half of the slurry to the pan. Gently push the tofu to combine the slurry with the sauce.
- Continue cooking for approximately 30 seconds.
- Add the remaining slurry and gently push the tofu again.
- Continue cooking for 30–60 seconds, until the sauce thickens and lightly coats the tofu.
- If the sauce is still too thin, continue cooking for approximately 30 seconds to allow some water to evaporate. Stop cooking once the sauce coats the tofu evenly.
Add Sichuan Peppercorns and Serve
- Turn off the heat.
- Add 1 g of ground Sichuan peppercorns and sprinkle the remaining 5 g of chopped scallion greens over the dish.
- Gently push the tofu to distribute the peppercorns and scallions evenly.
- Transfer the Mapo Tofu to a serving dish and serve while hot. It can be served with hot steamed rice.
Notes
Handling the tofu: Soft tofu has a delicate texture, so handle it gently during both blanching and simmering. Remove it with a slotted spoon after blanching, and gently push it with the back of a spatula during the final cooking stage.
Heat control: Heat the oil to approximately 160°C when browning the ground beef. Reduce the heat before adding the ginger, garlic, dried chilies, doubanjiang, and hot pot base to prevent the seasonings from burning.
Controlling saltiness: Both Pixian doubanjiang and Chongqing hot pot base contain salt. The 5 g of salt in this recipe is used only in the water for blanching the tofu. Do not add extra salt directly to the sauce. The salt content of hot pot base varies by brand.
Using cornstarch slurry: Mix 6 g of cornstarch with 30 ml of cold water. Stir again before using and add the slurry in 2 batches. Stop cooking when the sauce lightly coats the tofu.
Ingredient substitutions: Medium-firm tofu can replace soft tofu, although the texture will be firmer. Ground pork can replace ground beef. Pixian doubanjiang is the main seasoning, so it is best to purchase it from an Asian grocery store or online.
Sichuan peppercorns: Ground Sichuan peppercorns provide the characteristic tingling sensation. Black pepper adds a spicy aroma but does not produce the same sensation.
Food safety: Cook the ground beef thoroughly. Wash knives, cutting boards, and utensils that have come into contact with raw meat.
