Cantonese Steamed Sea Bass Recipe (Ginger & Scallion)

Rate this post

When I make steamed fish at home, I focus on cleaning the fish, controlling the steaming time, and preparing the sauce. I do not marinate the fish for a long time, and I do not use chopsticks to prop it up while steaming.

After the fish is cooked, I save the juices left on the steaming plate and use them to make a soy-based sauce. This sauce combines soy sauce, the juices from steaming the fish, and other seasonings. Saving the fish juices helps preserve their flavor and allows the sauce to complement the fish.

For this recipe, I use one whole sea bass weighing approximately 550 grams after scaling and gutting. The recipe serves 2 people. Preparation takes about 20 minutes, and cooking takes approximately 15 minutes. Since the fish has a naturally mild flavor, I season it with ginger, scallions, red chili, and a simple sauce. For a comforting soup to serve alongside fish, see our lotus root and pork rib soup.

In my experience, making good steamed fish does not require many complicated steps. Clean the fish thoroughly, control the steaming time, and prepare the soy-based sauce carefully. These steps are enough to make a homemade steamed sea bass dish that is suitable for a family dinner. For a more intensely flavored fish dish, try our Suan Cai Yu with pickled mustard greens.

Finished Steamed Perch

Cantonese Steamed Sea Bass

This recipe uses one whole sea bass weighing approximately 550 g after scaling and gutting. The fish is cleaned, lightly seasoned, and steamed. The steaming juices are then combined with light soy sauce, oyster sauce, and sugar to make a savory sauce. Finally, hot peanut oil is poured over the fish. Serves 2.
Prep Time 20 minutes
Cook Time 15 minutes
Total Time 35 minutes
Cuisine: Chinese

Ingredients
  

  • 550 g Whole sea bass, scaled and gutted Use one fish weighing approximately 550 g after cleaning. If sea bass is unavailable, substitute tilapia or sea bream. Tilapia has a milder flavor and softer flesh, while sea bream generally has firmer flesh.
  • 25 g Fresh ginger Cut into thin strips. Use 10 g for steaming and 15 g for the final garnish. If fresh ginger is unavailable, 1 g of ground ginger can be added to the sauce. Ground ginger cannot provide the appearance or fresh aroma of ginger strips, and its flavor is drier. Fresh ginger is recommended if you want to preserve the original garnish and aroma.
  • 35 g Scallions Cut into thin strips. Use 15 g of the white parts for the sauce and 20 g of the green parts for the garnish. If Chinese scallions are unavailable, substitute 25 g of chives. Chives have a milder aroma and a different appearance.
  • 8 g Red chili pepper Cut into thin strips for the garnish. If you prefer a non-spicy dish, substitute 8 g of red bell pepper. Red bell pepper adds color and a mild vegetable flavor without significant heat.
  • 50 g Red onion Slice thinly for the sauce. If red onion is unavailable, substitute 50 g of yellow onion. Yellow onion has a more direct onion flavor, and the sweetness and color will differ slightly.
  • 10 g Cilantro stems Chop finely for the sauce. If cilantro is unavailable, substitute 10 g of parsley stems. Parsley has a more herbal aroma and lacks the distinctive fresh scent of cilantro.
  • 2 g Salt Used to season the inside and outside of the fish.
  • 3 g Cornstarch Apply a thin layer to the surface of the fish. You can substitute 3 g of potato starch. The resulting surface texture may be slightly different.
  • 30 ml Light soy sauce Light soy sauce is a relatively light-colored soy sauce used mainly for seasoning. If only regular soy sauce is available, substitute a mixture of 25 ml regular soy sauce and 5 ml water. The substitute may produce a darker color and a stronger salty flavor.
  • 10 ml Oyster sauce Adds savory flavor and body to the sauce. If oyster sauce is unavailable, substitute 10 ml of vegetarian mushroom oyster-style sauce. The seafood flavor will be weaker and the mushroom flavor more noticeable. If neither sauce is available, omit it. The resulting sauce will have less body and a less complex savory flavor.
  • 4 g White sugar Helps balance the salty flavor of the light soy sauce and oyster sauce.
  • 20 ml Cooking oil Use 5 ml to grease the steaming plate, 5 ml on the fish, and 10 ml to saute the sauce ingredients. Canola oil or sunflower oil can be used as substitutes.
  • 25 ml Peanut oil Used for the final hot-oil garnish over the ginger, scallions, and chili. If peanut oil is unavailable, use canola oil, sunflower oil, or grapeseed oil. These substitutes have a milder nutty aroma.
  • 1500 ml Water for steaming Add to the lidded pot for steaming the fish. The water level must remain below the steaming rack and must not touch the bottom of the fish plate.
  • 0 to 30 ml Steaming juices Collect the liquid from the plate after steaming the fish. The steaming juices and any additional water used to make up the sauce liquid must total 30 ml.
  • 0 to 30 ml Water for adjusting the sauce Use only if the collected steaming juices measure less than 30 ml. Combine the steaming juices and water to make a total of 30 ml. Do not add extra liquid beyond this amount.

Equipment

  • 1 Lidded deep pot, at least 28 cm in diameter If you do not have a steamer, use a lidded deep pot instead. Add 1500 ml of water and ensure the water level remains below the steaming rack. If the pot is shallow, reduce the amount of water so it does not touch the fish plate and does not boil dry during steaming.
  • 1 Steaming Rack If you do not have a steaming rack, you can use a stable, heatproof bowl placed upside down to elevate the fish plate. Make sure the plate is stable and its bottom does not touch the water in the pot.
  • 1 Heatproof oval plate Used to hold the whole sea bass weighing approximately 550 g. You can use a heatproof ceramic or metal plate suitable for steaming. The plate must be long enough to accommodate the entire fish.
  • 1 Small Saucepan Used to saute the red onion, scallion whites, and cilantro stems before preparing the soy-based sauce. If you do not have a small saucepan, use a deep, heavy-bottomed frying pan.
  • 1 Fine-mesh strainer Used to strain the sauce. If you do not have a fine-mesh strainer, use a slotted spoon or regular spoon to remove the onion, scallions, and cilantro stems. Some small pieces may remain in the sauce.
  • 1 Kitchen Knife and Cutting Board Used to clean the fish and prepare the ingredients. Wash the knife and cutting board after handling raw fish to prevent cross-contamination between raw and cooked food.
  • 1 Kitchen Thermometer Used to measure the internal temperature at the thickest part of the fish. The center should reach 63°C. If you do not have a thermometer, check that the flesh is completely opaque and separates easily with a fork.

Method
 

Step 1: Clean the Fish and Prepare the Ingredients
  1. Rinse one whole sea bass weighing approximately 550 g after scaling and gutting under running water. Pay particular attention to the inside of the belly cavity and the blood near the backbone.
  2. If the skin has noticeable surface slime, quickly pour warm water at approximately 60°C over the fish from head to tail, then immediately rinse it with clean water. If you cannot measure the water temperature with a thermometer, simply rinse the fish under running water. Do not expose the fish to very hot water for an extended period.
  3. Pat the fish and its belly cavity dry with paper towels. Make two cuts into the thickest part of the back. Cut into the flesh without severing the backbone.
  4. Cut 25 g of fresh ginger into thin strips and divide it into two portions of 10 g and 15 g. Cut 35 g of scallions into thin strips and separate 15 g of the white parts from 20 g of the green parts. Cut 8 g of red chili pepper into thin strips, slice 50 g of red onion thinly, and finely chop 10 g of cilantro stems.
    Steamed Perch_Cleaning Perch
Step 2: Season the Fish and Prepare the Plate
  1. Rub 2 g of salt evenly over the inside and outside of the fish. Apply 3 g of cornstarch in a thin layer over the fish. There is no need for a prolonged marinating period.
  2. Coat the bottom of a heatproof fish plate with 5 ml of cooking oil. Place the fish on the plate, arrange 10 g of ginger strips over the fish, and drizzle another 5 ml of cooking oil over it.
    Steamed Perch: Simple Seasoning and Plating
Step 3: Steam the Fish
  1. Pour 1500 ml of water into a lidded deep pot with a diameter of at least 28 cm. Place the steaming rack inside the pot. Make sure the water level is below the rack and does not touch the bottom of the fish plate.
  2. Bring the water to a steady boil. Place the plate containing the fish on the rack. Cover the pot and steam over high heat for 10 minutes. Do not open the lid during steaming.
  3. After 10 minutes, measure the internal temperature at the thickest part of the fish using a kitchen thermometer. The fish is ready when the center reaches 63°C. If the temperature is below 63°C, continue steaming for another 2 minutes and measure again.
  4. If you do not have a thermometer, check that the flesh has turned opaque and separates easily with a fork.
    Steamed Perch_Steamed Fish
Step 4: Reserve the Steaming Juices and Make the Soy-Based Sauce
  1. After steaming, pour the liquid from the fish plate into a clean bowl. Measure up to 30 ml of steaming juices. If there is less than 30 ml, add water until the combined liquid reaches 30 ml.
  2. Add 10 ml of cooking oil to a small saucepan. Once the oil is hot, add 50 g of red onion, 15 g of scallion whites, and 10 g of chopped cilantro stems. Saute for 2 minutes until the ingredients release a noticeable aroma.
  3. Add the mixture of steaming juices and water totaling 30 ml, along with 30 ml of light soy sauce, 10 ml of oyster sauce, and 4 g of white sugar. Bring the sauce to a boil, then maintain a gentle boil for approximately 2 minutes so the seasonings combine.
  4. Strain the sauce through a fine-mesh strainer to remove the onion, scallions, and cilantro stems. Keep the strained sauce for serving.
Step 5: Garnish the Fish and Pour Over Hot Peanut Oil
  1. Arrange 15 g of ginger strips, 20 g of scallion greens, and 8 g of red chili strips over the steamed fish.
  2. Heat 25 ml of peanut oil in a small saucepan to approximately 180°C. Use a kitchen thermometer to measure the oil temperature. Do not allow the oil to smoke heavily for an extended period.
  3. Carefully pour the hot peanut oil evenly over the ginger, scallions, and chili on the fish. Keep your hands and face away from the plate to avoid splashing hot oil.
  4. Finally, pour the prepared soy-based sauce over the fish and around the plate. Serve immediately while hot.

Notes

This recipe uses one whole sea bass weighing approximately 550 g after scaling and gutting. It serves 2 people.
  • When cleaning the fish, pay particular attention to the blood inside the belly cavity and near the backbone.
  • After steaming for 10 minutes, check the thickest part of the fish. The internal temperature should reach 63°C before serving. Without a thermometer, make sure the flesh is opaque and separates easily.
  • Reserve the steaming juices whenever possible. Combine the steaming juices and any additional water to make 30 ml in total, then add 30 ml of light soy sauce. The ratio of liquid to soy sauce is 1:1.
  • Heat the peanut oil to approximately 180°C before pouring it over the ginger, scallions, and chili. Take care to avoid splashing hot oil.
  • If you do not have a steamer, use a lidded deep pot with a steaming rack. Keep the fish plate stable and ensure that its bottom does not touch the water.
  • If sea bass is unavailable, substitute tilapia or sea bream. The flesh texture and thickness will vary, so check the internal temperature rather than relying only on the steaming time.
Scroll to Top